When the air conditioner is moved, it needs to be repositioned. However, some consumers do not know that the air conditioner must be moved by special after-sales personnel of the relevant brands. Otherwise, the use of the air conditioner at home will be seriously endangered if informal maintenance personnel are invited to save time. Next, the maintenance personnel of Zhangqiu air conditioner relocation will talk about the six major issues of air conditioner relocation!
1. Trial run
Test whether various functions of the air conditioner work normally before moving.
2. Recover refrigerant and remove indoor and outdoor connecting lines
So that both ends of the connecting line can be marked, it will not be possible to connect the connecting line incorrectly during installation.
3. Keep the connector clean
As the used air conditioners are generally attached with dust and dirt, when removing the connecting pipe interface nuts, attention should be paid to the cleaning of the bell mouth and joints to prevent dust and dirt from entering the pipeline and preventing the pipeline from being blocked when working after the machine is moved. Before installing the butt joint, check again whether there is dirt at the bell mouth and inside, and cover the nut after cleaning. If it happens to rain, when the connecting pipe is disassembled, wrap the pipe orifice with a plastic bag to prevent rainwater from entering and causing ice blockage.
4. When disassembling the indoor unit, prevent condensate water from entering the circuit board
As there is some condensed water left in the water tray and drain pipe of the indoor unit, when disassembling and moving the indoor unit, the end of the indoor unit with the circuit board should not face down or even turn over. Instead, the end with the circuit board should be slightly higher so that the water can flow out from the other end, which can prevent the condensed water from pouring into the circuit board and prevent electrical failure during startup.
5. The bell mouth of connecting pipe shall be inspected
Because the bell mouth on the connecting pipe has been squeezed for a long time, there is a deep circle of indentation at the root of some bell mouths. These bell mouths are easy to break, pull off, and leak when starting up. Therefore, the bell mouth must be carefully checked after being removed. Unqualified ones must be cut off and re expanded to avoid hidden dangers.
6. Be careful during handling and installation
During the handling and installation of the external machine, it is not allowed to turn over, and the inclination angle is too large. It is forbidden to lift the machine by grasping the stop valve. In addition, attention should also be paid to handling with care when moving the machine, scientific disassembly and assembly procedures, reasonable pipe drawing direction, moderate bending strength and other links.
If the irregular maintenance personnel move the air conditioner, the relevant manufacturers will no longer provide warranty for the product. Secondly, the irregular maintenance personnel may charge more and more for the technology and other factors, which will not guarantee the future use of the air conditioner. Therefore, the small editor brings us six things to pay attention to when the air conditioner is moved, Don't be fooled by irregular maintenance personnel. More relevant content will come to our website http://www.zqsybj.com Consult!